Failure Description | Possible Cause | Troubleshooting |
---|---|---|
No printout | Recorder module disabled | Verify the recorder status LED is lit. If it is lit, recover its function in "Factory Maintenance". |
Printing paper jam | Reinstall the paper roll properly. | |
Cable defective or improperly connected |
| |
Recorder failure | Replace the recorder. | |
The main board is faulty. | Replace the main board. | |
Poor printing quality | Printing paper thermal coating failure | Replace the printing paper. |
Thermal head dirty | Clean the thermal head. | |
Recorder failure | Replace the recorder. | |
Source: Figure 5.5.5 Page 5-7 Mindray ePM Service Manual |
Comments
0 comments
Please sign in to leave a comment.