Failure | Description | Possible Cause Troubleshooting |
---|---|---|
No output for the nurse call signal | Main control board defective | Replace the main board. |
Replace the main board. | The main board is faulty | Replace the main board. |
Network interface failure | The main board is faulty. | Replace the main board. |
VGA interface failure | Display not matched with the VGA interface time sequence | Check whether the display supports the resolution of 1280*800 (10-inch/12-inch model) or 1376*768 (15-inch). |
Main control board defective | Replace the main board. | |
Source: Figure 5.5.6 Page 5-8 Mindray ePM Service Manual |
Comments
0 comments
Please sign in to leave a comment.