Before filling the reservoir, verify that the autoclave is idle and there is no pressure in the chamber.
Note: Use only water having the characteristics stated in Water Quality. Using tap water will clog the system and invalidate the manufacturer’s guarantee.
To fill the water in the reservoir:
Lift up the water reservoir cover (see below).
Pour distilled water into the reservoir through the water filter on top of the autoclave until.
In case you fill too much water, it will spill on the counter.
The clean water level indicator will change from a red water droplet symbol to a blue water droplet, as shown below:
Comments
0 comments
Please sign in to leave a comment.